24/7 Emergency Line 0467 189 950

Trotec T610 Moisture Meter

Trotec T610 Moisture Meter

    • Moisture meters devices

Trotec T610 Moisture Meter

The T610 is a professional hand-held measuring device from the Trotec MultiMeasure series for a rapid non-destructive moisture measurement up to 300 mm.

As a quality measurement instrument that is “made in Germany”, the T610 convinces with digital accuracy in high-quality two-component construction.

  • Precision climate measuring device with outstanding measurement accuracy
  • Integrated pyrometer and dew point alarm function
  • German industrial design in robust, premium two-component construction with IP54 type of protection
  • Continuous easy-to-clean glass surface made of highly scratch-resistant Blanview special glass for a high-contrast display of measured values even in the sunlight
  • Capacitive touchscreen control panel

By means of microwave technology it is possible to detect distributions of moisture content at a depth of up to 300 mm. Another advantage of the method, in addition to the great measuring depth, is its independence from the level of salt content in the material. It therefore makes no difference to the microwave technique whether an older or a new building is being measured. Since the instrument’s screen can display two values, for purposes of results evaluation a function value can be displayed at the same time as the current measured value if required.

For an immediate evaluation of the measured data, minimum, maximum and average functions are available. In addition the current measured value can be retained by means of the hold function.

You can connect the T610 moisture meter to a PC with a USB cable. With the MultiMeasure Studio Software (free in the service / download section of uk.trotec.com) the measured values of the T610 can be transferred online and in real time to the PC. In this way, the values are saved for later analysis or reports.

With the online-memory function, you can perform raster measurements on the computer, e.g. when measuring the building moisture on a cellar wall.

$- EX GST per day

$- EX GST for seven days

As a quality instrument that is “made in Germany” the T660 is impressive in terms of its digital precision without the disadvantage of drift in measured values exhibited by comparable analogue instruments. Due to its permanent real time displaying of the measured value on the easy-to-read display, you can determine damp and dry wall or floor areas rapidly. In addition, the device is suitable for preliminary inspection of the maturity of building materials in CM measurements.

For an immediate evaluation of the measured data, minimum, maximum and average functions are available. In addition the current measured value can be retained by means of the hold function. Since the instrument’s screen can display two values, for purposes of results evaluation a function value can be displayed at the same time as the current measured value if required.

You can connect the T660 moisture meter to a PC with a USB cable. With the MultiMeasure Studio Software (free in the service / download section of uk.trotec.com) the measured values of the T660 can be transferred online and in real time to the PC. In this way, the values are saved for later analysis or reports.

With the online-memory function, you can perform raster measurements on the computer, e.g. at the building moisture measurement of a tested cellar wall.

A particular practical advantage is the alarm function:

Here an individual limit value is entered into the unit before any measurements are taken. In this way large wall or floor areas can be measured quickly and effectively. The user can concentrate on the object being measured without having to look constantly at the measurement results on the display. As soon as the pre-defined alarm limit value is exceeded an acoustic warning signal sounds automatically!

Specifications

MEASURING PRINCIPLE:
Microwave
MATERIAL MOISTURE MEASURING RANGE:
1 to 200 digits
PENETRATION DEPTH:
up to 300 mm
DISPLAY:
LCD Touch Screen
HOUSING DESIGN:
Plastics
POWER SUPPLY:
Internal Battery 4 x 1.5V, AA
LENGTH (MM):
191
WIDTH (MM):
65
HEIGHT (MM):
65
WEIGHT (KG):
0.425
PRODUCT TYPE:
Moisture Meters
MATERIAL MEASUREMENT:
Building Materials
MATERIAL MEASUREMENT:
Concrete/Stone
MEASURING TECHNOLOGY:
Microwave
CONNECTIVITY:
USB

A few practical benefits:

  • Measuring device designed and produced according to the highest quality standards in Germany
  • German industrial design in robust, premium two-component construction with IP54 type of protection
  • Continuous easy-to-clean glass surface made of highly scratch-resistant Blanview special glass for a high-contrast display of measured values even in the sunlight
  • Capacitive touchscreen control panel
  • High-resolution colour display for simultaneous indication of two measured values
  • Specifically designed for quick, non-destructive sub-surface measurements
  • Moisture alarm function
  • Grid measurement function via USB with active software connection
  • Incl. MultiMeasure Studio measurement data management software (standard download version)

Hire Now

    (Delivery outside Orange will be quoted)

    Related

    Go to Top